100 Gb/s Communications Test & Measurement Solutions

Power Dividers and Pick off tees

Power Dividers & Pick-Off Tees
Our Power Dividers are resistive tees that have excellent performance and frequency response from DC to as high as 50 GHz. Our Models 5331, 5333 & 5350 split the signal into two equal replicas of the input signal. Both outputs are 6 dB down from the input power.
We offer several versions of Pick-Off Tees. These components produce a small replica of a signal at a pick-off port, at ratios of 10, 14, or 20 dB down from the input signal level.
The output ratio in the table below refers to the power ratio of the pick-off port to the input signal, and the power ratio of the through-line to the input signal respectively.

5350 50 GHz Power Divider
SPECIFICATIONS
Model Type Risetime Bandwidth Output Ratios RF Connectors Spec
Sheet
5331 Divider 17 ps 18 GHz 6 dB, 6 dB SMA
5333 Divider 15 ps 25 GHz 6 dB, 6 dB SMA
5334 1:4 Divider 15 ps 25 GHz 12 dB (4x) SMA
5336 Splitter 20 ps 20 GHz 6 dB, 6 dB SMA
5340 Pick-Off 50 ps 8 GHz 10 dB, 3.3 dB SMA
5350 Divider 8 ps 40 GHz
50 GHz		 6 dB, 6 dB 2.92 mm or
2.4 mm
5361 Pick-Off 7 ps 40 GHz 14 dB, 1.8 dB 2.92 mm or
2.4 mm
5370 Pick-Off <17 ps >25 GHz 14 dB, 0.8 dB
20 dB, 0.4 dB		 SMA
5372 Z-Matched Pick-off 15 ps >26GHz 14 dB, 2.0 dB SMA