Power Dividers and Pick-off Tees

Posted by admin on May 19, 2012 in Components, Picosecond Components | 0 comments

Power Dividers & Pick-Off Tees Our Power Dividers are resistive tees that have excellent performance and frequency response from DC to as high as 50 GHz. Our Models 5331, 5333 & 5350 split the signal into two equal replicas of the input signal. Both outputs are 6 dB down from the input power. We offer several versions of Pick-Off Tees. These components produce a small replica of a signal at a pick-off port, at ratios of 10, 14, or 20 dB down from the input signal level. The output ratio in the table below refers to the power ratio of the pick-off port to the input signal, and the power ratio of the through-line to the input signal respectively. 5350 50 GHz Power Divider

SPECIFICATIONS

Model Type Risetime Bandwidth Output Ratios RF Connectors Spec Sheet 5331 Divider 17 ps 18 GHz 6 dB, 6 dB SMA 5333 Divider 15 ps 25 GHz 6 dB, 6 dB SMA 5334 1:4 Divider 15 ps 25 GHz 12 dB (4x) SMA 5336 Splitter 20 ps 20 GHz 6 dB, 6 dB SMA 5340 Pick-Off 50 ps 8 GHz 10 dB, 3.3 dB SMA 5350 Divider 8 ps 40 GHz 50 GHz 6 dB, 6 dB 2.92 mm or 2.4 mm 5361 Pick-Off 7 ps 40 GHz 14 dB, 1.8 dB 2.92 mm or 2.4 mm 5370 Pick-Off <17 ps >25 GHz 14 dB, 0.8 dB 20 dB, 0.4 dB SMA 5372 Z-Matched Pick-off 15 ps >26GHz 14 dB, 2.0 dB SMA

REQUEST A QUOTE OR PRODUCT DEMO